Technology

Technology

The Aluminium circle mould we have:

Following aluminium circle size are available for sample, the sample will be free.can be dispatched within one week.

 

  Unit:mm
ALUMINIUM CIRCLE MOULD: 100 110 120 130 140 150 160 170 180 190
200 210 220 230 240 250 260 270 280 290
300 310 320 330 340 350 360 370 380 390
400 410 420 430 440 450 460 470 480 490
500 510 520 530 540 550 560 570 580 590
600 610 620 630 640 650 660 670 680 690
700                  
                   
                   
105 115 125 135 145 155 165 175 185 195
205 215 225 235 245 255 265 275 285 295

 

 

Characteristic of Alloy for reference:

 

Alloy   Series Main Application Alloy Characteristics of Alloy  Temper
1000 Series Cookware & Electrical Applianes :Anodizing, Polishing, Non-stick   Cookware, Coffee Pots, Fat Fryers;Lighting Reflectors :Down Lights,Street Lights;Construction :Curtain Walls, Ceilings 1050 Excellent forming and spinning quality O
1060 Similar with 1050
1080 Good reflectivity 
1085 Better reflectivity than 1080
1090 Excellent reflectivity
1100 Excellent forming and anodizing
1200 Excellent forming and anodizing
3000 Series Cookware & Electrical Applianes :Hard anodizing, Polishing,Non-stick Cookware,Coffee Pots, Fat Fryers; Lighting Reflectors :Down Lights, High Bay Lights, Street Lights;        Construction:Curtain Walls, Ceilings 3002 Good reflectivity and light diffusion H12
3003 Excellent forming, hard anodizing and enameling H14
3004 Higher strength than 3003 H16
3103 Excellent forming, hard anodizing and enameling H18
3105 Higher strength than 3003  
     
5000 Series Automobile :Car Wheels, Pressure Vessel, Parts; Traffic sign and road mark plate 5054 Popular material use for auto&motor parts H32
    H34
5052 With good strength and better flatness. H38

 

 

 

Chemical Component

Alloy

Si

Fe Cu Mn Mg Cr Ni Zn   Ti Other Al
1060 0.25 0.35 0.05 0.03 0.03 _ _ 0.05 V:0.05 0.03 Single Total 99.6
1050 0.25 0.4 0.05 0.05 0.05 _ _ 0.05 V:0.05 0.03 0.03 _ 99.5
1100 Si+Fe:0.95 0.05~0.40 0.05 _ _ _ 0.1 _ _ 0.03 _ 99
1200 Si+Fe:1.00 0.05 0.05 _ _ _ 0.1 _ 0.05 0.05 0.15 99
3003 0.6 0.7 0.05~0.20 1.0~1.5 _ _ _ 0.1 _ _ 0.05 0.15 R
3004 0.3 0.7 0.25 1.0~1.5 0.8~1.3 _ _ 0.25 _ _ 0.05 0.15 R
3005 0.6 0.7 0.3 1.0~1.5 0.20~0.6 0.1 _ 0.25 _ 0.1 0.05 0.15 R
3105 0.6 0.7 0.3 0.30~0.8 0.20~0.8 0.2 _ 0.4 _ 0.1 0.05 0.15 R
5005 0.3 0.7 0.2 0.2 0.50~1.1 0.1 _ 0.25 _ _ 0.05 0.15 R
5052 0.25 0.4 0.1 0.1 2.2~2.8 0.15~0.35 _ 0.1 _ _ 0.05 0.15 R
5083 0.4 0.4 0.1 0.40~1.0 4.0~4.9 0.05~0.25 _ 0.25 _ 0.15 0.05 0.15 R
5086 0.4 0.5 0.1 0.20~0.7 3.5~4.5 0.05~0.25 _ 0.25 _ 0.15 0.05 0.15 R

 

Mechanical

Alloy

(AA)

Temper %E (min) UTS (mpa) Bend test: radius of bend
(at 50 mm gauge length) Min Max (T=material thickness)
1050 O 29 55 95 close
H14 6 95 125 1/2T
H18 4 125 - 1T
1070 O 29 95 - close
H14 6 95 120 1/2T
H18 4 120 - 1T
1100 O 29 70 110 close
H14 5 105 140 1/2T
  4 125 150 1/2T
H18 3 140 - 1T
3003 O 25 90 130 close
H14 5 130 180 1/2T
H16 4 150 195 1T
H18 3 170 - 3T
5052 O 16 170 215 1/2T
H32 8 210

260

1.5T
H34 7 230 280 2.0T
H38 4 270 - 2.5T